Plug in the lights to make sure they are working. Hang lights in the back of the tree and work your way down. You can hide extra lights behind a tree branch when you reach the bottom.
Table of Contents
Do you put lights on Christmas tree first or last?
It’s more difficult to decorate a christmas tree after the tree is in the ground if you don’t add the lights first. If you’re going to decorate your tree with lights, you’ll want to make sure that you have at least one or two lights on each branch.
This will give you a lot of light to work with, and it will also make it easier for you to see what’s going on inside the branches. You can also use a piece of string to tie them to the branch, which will make them easier to move around. Once you’ve found a good spot, start by placing the first light on top of the other lights.
Next, place the second light next to it.
How many lights do I need for a 6 foot Christmas tree?
For a basic look, we recommend at least 100 bulbs per 1ft of tree, so a 6ft tree needs at least 600 leds. You can add as many lights as you want, but we recommend 700 for the best results.
Which comes first garland or ornaments?
If your lights are on, you can wrap your tree with anything else you want. You can use a piece of string or ribbon and tie it to the top of the light fixture. This will keep the lights from falling and will prevent them from touching the ground.
How many lights should be on a Christmas tree?
According to lowe’s, a good rule of thumb is 100 lights for every half of a tree. Better homes and gardens recommend using three 100 light sets for every foot of a tree’s height. Simple suggests 100 lights for every tree.
Can you staple string lights?
Leave a little slack at the area closest to the power source and use a staple gun with ¼-in. staples to attach the string lights closest to the power source. Continue to staple the string lights until you reach the end of the cords, if you pull the cord taught, but not tight.